Shenzhen Hangalaxy Technology Co.,Ltd
Create Your Reliable Fiber Optic Connectivity Chinese Supplier Shenzhen Hangalaxy Technology Co.,Ltd
Add to Cart
Generic Compatible 100G QSFP28 MMF LR4 60km Fiber Optical Transceiver
The Hangalaxy 100Gb/s optical transceiver is designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. It is also qualified for use in Mellanox InfiniBand EDR end-to-end systems. The fiber optical transceiver is compliant with the QSFP28 MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4. Digital diagnostic functions are available via the I2 C interface, as specified by the QSFP28 MSA. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely, on the receiver side the module de-multiplexes a 100Gb/s optical LAN WDM input into 4 optical signals and then converts them to 4 output channels of electrical data.
Features
(1) Hot pluggable QSFP28 MSA form factor;
(2) Compliant to IEEE 802.3ba 100GBASE-LR4;
(3) Supports 103.1Gb/s aggregate bit rate;
(4) Up to 10km reach for G.652 SMF;
(5) Single +3.3V power supply;
(6) Operating case temperature: 0~70oC;
(7) Transmitter: cooled 4x25Gb/s LAN WDM DFB TOSA (1295.56, 1300.05, 1304.58, 1309.14nm);
(8) Receiver: 4x25Gb/s PIN ROSA;
(9) 4x25G electrical interface (OIF CEI-28G-VSR);
(10) Maximum power consumption 4.0W;
(11) Duplex LC receptacle;
(12) RoHS-6 compliant.
Applications
(1) 100GBASE-LR4 Ethernet Links;
(2) Infiniband QDR and DDR interconnects;
(3) Datacenter and Enterprise networking.
Technical Parameter
| Pin | Name | Description | Plug Sequence | Notes |
| 1 | GND | Ground | 1 | |
| 2 | Tx2n | Transmitter Inverted Data Input | 3 | |
| 3 | Tx2p | Transmitter Non-Inverted Data Input | 3 | |
| 4 | GND | Ground | 1 | |
| 5 | Tx4n | Transmitter Inverted Data Input | 3 | |
| 6 | Tx4p | Transmitter Non-Inverted Data Input | 3 | |
| 7 | GND | Ground | 1 | |
| 8 | ModSelL | Module Select | 3 | |
| 9 | ResetL | Module Reset | 3 | |
| 10 | Vcc Rx | +3.3 V Power supply receiver | 2 | |
| 11 | SCL | 2-wire serial interface clock | 3 | |
| 12 | SDA | 2-wire serial interface data | 3 | |
| 13 | GND | Ground | 1 | |
| 14 | Rx3p | Receiver Non-Inverted Data Output | 3 | |
| 15 | Rx3n | Receiver Inverted Data Output | 3 | |
| 16 | GND | Ground | 1 | |
| 17 | Rx1p | Receiver Non-Inverted Data Output | 3 | |
| 18 | Rx1n | Receiver Inverted Data Output | 3 | |
| 19 | GND | Ground | 1 | |
| 20 | GND | Ground | 1 | |
| 21 | Rx2n | Receiver Inverted Data Output | 3 | |
| 22 | Rx2p | Receiver Non-Inverted Data Output | 3 | |
| 23 | GND | Ground | 1 | |
| 24 | Rx4n | Receiver Inverted Data Output | 3 | |
| 25 | Rx4p | Receiver Non-Inverted Data Output | 3 | |
| 26 | GND | Ground | 1 | |
| 27 | ModPrsL | Module Present | 3 | |
| 28 | IntL | Interrupt | 3 | |
| 29 | Vcc Tx | +3.3 V Power supply transmitter | 2 | |
| 30 | Vcc1 | +3.3 V Power Supply | 2 | |
| 31 | LPMode | Low Power Mode | 3 | |
| 32 | GND | Ground | 1 | |
| 33 | Tx3p | Transmitter Non-Inverted Data Input | 3 | |
| 34 | Tx3n | Transmitter Inverted Data Input | 3 | |
| 35 | GND | Ground | 1 | |
| 36 | Tx1p | Transmitter Non-Inverted Data Input | 3 | |
| 37 | Tx1n | Transmitter Inverted Data Input | 3 | |
| 38 | GND | Ground | 1 |
Notes
1. Due to measurement accuracy of different single mode fibers, there could be an additional +/-1 dB fluctuation, or a +/- 3 dB total accuracy.
Absolute Maximum Ratings
| Parameter | Symbol | Unit | Min | Max |
| Storage Temperature Range | Ts | oC | -40 | 85 |
| Relative Humidity | RH | % | 0 | 95 |
| Maximum Supply Voltage | Vcc3 | V | -0.5 | 4.0 |
Compliance
1. IEEE 802.3-2015 Clause 88 standard;
2. IEEE 802.3-2015 Clause 83E standard;
3. ITU-T G.959.1-2016-04 standard;
4. OIF-CEI-03.1 CEI-28G-VSR standard;
5. SFF-8661 Rev 2.3 QSFP28 Module Mechanical;
6. SFF-8679 Rev 1.7 QSFP28 Base Electrical;
7. SFF-8636 Rev 2.7 Common Management Interface;
8. Class 1 laser safety;
9. Tested in accordance with Telcordia GR-468;
10. RoHS 6/6.
Hangalaxy provides SFP transceivers for both MultiMode as SingleMode fiber, compatible with most of today’s switch vendors. Hangalaxy’s Dual Fiber SFP’s support data ranges between 100 Mbit/s and 4.25 Gbps and distances up to 160 km. Go to the Hangalaxy SFP product range.