Shenzhen Hangalaxy Technology Co.,Ltd
Create Your Reliable Fiber Optic Connectivity Chinese Supplier Shenzhen Hangalaxy Technology Co.,Ltd
Add to Cart
Cisco QSFP Fanout Cable 40G QSFP+ Active Optical Breakout Cable
This AOC is a high performance cable for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps. These cables also support 4 x 10G Infini-Band QDR applications and are backwards compatible to the 4 × 5G IB DDR and 4 × 2.5G IB single IB SDR applications. This product is leveraged from Hangalaxy QSFP+ to QSFP+ Active Optical Cable product and SFP+ Active Optical Cable product. Where applicable, consult these respective datasheets. This AOC incorporates Hangalxy's proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Keyed Characteristics
● Quad Small Form-factor Pluggable Plus (QSFP+) to 4 x Small Form-factor Pluggable Plus (SFP+) active optical cable.
● Active fibre cable assembly.
● 41.2 Gbit/sec to 4 x 10.5 Gbit/sec
● Operating distance of 10 metre.
● Operating temperature 0 - 70 c.
● Transmission media Multi-mode Fibre.
Safety Standards
● EN 60825-1 (2007)/EN 60825-2 (2010);
● FDA 21CFR1040.10 Class 1 Laser Product;
● Compliance with Restriction on Hazardous Substances (RoHS) directive;
● CE Marked.
Applications
● 40GbE and 10GbE break-out applications for Datacom switch and router connections;
● 40G to 4×10G density applications for Datacom and Proprietary protocol applications;
● Datacenter.
| PIN | Name | Function/Description |
| 1 | VeeT | Transmitter Ground |
| 2 | Tx_Fault | Transmitter Fault - High indicates a fault condition |
| 3 | Tx_Disable | Transmitter Disable – High or open disables the transmitter |
| 4 | SDA | Two wire serial interface Data Line |
| 5 | SCL | Two wire serial interface Clock Line |
| 6 | MOD_ABS | Module Absent (Output), connected to VeeT or VeeR in the module |
| 7 | RS0 | Rx Rate Select,not used |
| 8 | RX_LOS | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1 | Tx Rate Select,not used |
| 10 | VeeR | Receiver Ground |
| 11 | VeeR | Receiver Ground |
| 12 | RD- | Receiver Inverted DATA out |
| 13 | RD+ | Receiver Non-inverted DATA out |
| 14 | VeeR | Receiver Ground |
| 15 | VccR | Receiver Power Supply |
| 16 | VccT | Transmitter Power Supply |
| 17 | VeeT | Transmitter Ground |
| 18 | TD+ | Transmitter Non-Inverted DATA in |
| 19 | TD- | Transmitter Inverted DATA in |
| 20 | VeeT | Transmitter Ground |
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Storage Temperature | TST | -20 | 85 | ℃ |
| Relative Humidity | RH | 0 | 85 | ％ |
| Case Operating Temperature | TOPC | 0 | 70 | ℃ |
| Supply Voltage | VCC | -0.3 | 3.6 | V |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
| Operating Case temperature | TA | 0 | +70 | ℃ | |
| Supply Voltage | VCC | 3.13 | 3.3 | 3.47 | V |
| Supply current | Icc | 300 | mA | ||
| Channel Data Rate | Dr | - | 25.78125 | Gbps |
Transmitter
| Parameter | Symbol | Min | Typical | Max | Unit |
| Input differential impedance | Zin | 90 | 100 | 110 | Ω |
| Differential Data Input Swing | Vin PP | 300 | 1100 | mV | |
| Transmit Enable Voltage | VEN | 0.8 | V | ||
| Transmit Disable Voltage | VD | 2.0 | V | ||
| Average launch power | PAVG | -7.5 | -1 | +2.5 | dBm |
| Extinction Ratio | ER | 2.0 | dB | ||
| Centre Wavelength | λc | 840 | 850 | 860 | nm |
CWDM/DWDM Module Facilicy
Hangalxy 40CH 100G AWG Module Factory
The rate of Hangalaxy 40G AOC cable is quite stable on our Cisco Nexus 9000 series equipment with no compatibility issue. Very pleased with my first order for nice products' performance. Regarding to my next project, will order FS products again.
Dispatch
All orders received before 4pm Monday to Friday will ship the same day. We will endeavour to ship any orders received after this deadline, however please call if you require confirmation.